You’d need a Wi-Fi connection, but you are in an office or in a hotel where the internet is only available in a wired , ie only an Ethernet cable? Do not despair. If you have a laptop with you, and this computer is equipped with an Ethernet port PC (or USB port to attach a USB adapter> Ethernet), there you go!

Believe it or not, you can easily solve your connection problem by turning your laptop into a Wi-Fi hotspot, or in a hotspot to share the Internet connection with other computers or portable devices wirelessly . I know that may seem like a complex or requires some kind of technical knowledge. But no, it is one of the easiest things in the world!

What are you waiting to try it ?! On, take five minutes of free time, to ‘look at the wheel of how to use the PC as hotspot here below and try to put it into practice. You can use any version of Windows from 7 onwards and, if you have a Mac, any version of the MacOS operating system. I bet you will be amazed by the ease and speed with which manage to get the desired result, all at no cost of course.

How to use the PC as hotspot on Windows 10

If you have a computer equipped with Windows 10 see use the PC as hotspot without resorting to external applications. All you need to do is take advantage of the network sharing feature included in Microsoft operating system. Before taking action, however, be sure that your network card is equipped to support this function.

To check the compatibility of your network card with the connection sharing feature, open the Command Prompt (if you do not know how to do it, just type cmd in the menu Start and press Enter on the PC keyboard) and the NETSH WLAN show drivers . If your card supports connection sharing, the output returned by the command you will find the word host Network supported: Yes .

At this point, remaining in the Command Prompt, by the following commands to activate the connection sharing on your PC.

  • NETSH WLAN September hostednetwork mode = allow ssid = nome_SSID key = chiave_accesso where instead of “nome_SSID” and “chiave_accesso” you have to type the name you want to give your wireless network to be created with the computer and the password needed to access it.
  • NETSH WLAN start hostednetwork to activate the hosted network feature.

Come usare il PC come hotspot

After this step also, close the Command Prompt, and went to the section of the control panel that lists all network connections. If you do not know how to do it, click on the button Start Windows (flag placed in the lower left of the screen), look network connections in the menu that opens and select the icon View network connections from the search results.

In the window that opens, right-click the connection icon to share (eg. Local Area Connection (LAN) ) and select the item Properties from the menu that appears. Then select the tab for the Sharing connection, put the check mark next to the items Allow other network users to connect through this computer’s Internet connection and Allow Allow other network users to control or disable the shared Internet connection select the network adapter name to share (eg. Wi-Fi ) from the drop down menu home networking connection and click OK to save the changes.

Come usare il PC come hotspot

Mission accomplished! Now you can use your computer’s Internet connection to connect to the network smartphones, tablets and any other wireless device.

When you have finished using the connection, turn off the hotspot, open the Command Prompt and the NETSH WLAN stop hostednetwork . Subsequently, to reactivate it, simply use the command NETSH WLAN start hostednetwork .

How to use the PC as a hotspot of Windows 8.x and Windows 7

If your notebook is equipped with Windows 8.x or Windows 7 You can rely on Virtual Router a free and open source small program that allows you to turn your computer into a Wi-Fi hotspot password protected in two clicks. Supports both Ethernet and wireless connections, this means that allows you to take advantage of the notebook even mo ‘repeater to extend the range of an existing Wi-Fi (albeit slightly).

To download Virtual Router to your computer, connected to the Internet site of the application and click on the button download which is in the right column. Then open the software installation package ( VirtualRouterInstaller.msi ), and presses the button before Next three times and then on Yes and Close to finish the setup.

Come usare il PC come hotspot

If you got a message on the absence of .Net Framework 3.5 on PC (software necessary for the operation of Virtual Server), solve the problem by connecting to site of Microsoft Internet and clicking on the buttons Download and No, thank you. Continue to download it to your PC.

download is complete, open the .Net Framework installation package
( dotnetfx35setup.exe ) and click on the first of Yes and then Download and install this feature to complete the setup. After re-launching the installer Virtual Router and completes the process as explained previously.

Finally here we are! After you install Virtual Router, launch the application using its icon in the Windows Start menu and create your own wireless network by typing in the field Network name the name you want to assign to the connection, and in the password password you want to use to protect the network from unauthorized access.

Come usare il PC come hotspot

button at this point, select from the drop down menu Shared connection the connection to share (eg. Ethernet or Wireless Network Connection ) and press Start Virtual Router to start creating the hotspot.

After work, when you will not need the network created by Virtual Router, you can disable your hotspot by clicking on Stop Virtual Router button. Easier than that?

How to use your Mac as a hotspot

Do you have a Mac? Then I’m happy to report that you can use the computer as a hotspot without installing any application. Thanks to the function for network sharing included in MacOS, you can in fact share a wired network wirelessly or do the reverse: to transform a wireless network to a wired network to connect to devices that do not support wireless connection.

To enable the sharing of the visited network System Preferences and click the Sharing . So select the Internet Sharing present in the left sidebar and choose from the drop down menu Share your connection from the type of connection you want to share (eg. Wi- Fi or Ethernet ).

At this point, put the check mark next to the type of technology to use to propagate the hotspot signal (eg. Wi-Fi to create a wireless access point from a network Ethernet or Ethernet to do the reverse) and next to the entry Internet Sharing present in the left sidebar, click on Start button to confirm the creation of ‘ hotspot and you’re done.

Come usare il PC come hotspot

By default, the wireless access point created by the Mac is not password protected. To set one up you have to click on the button Wi-Fi Options placed at the bottom right and select WPA2 Personal from the drop down menu Security in the window that opens.

To turn off network sharing, back in System Preferences click on Sharing and remove the check mark from the item Internet Sharing .